Mechanical Clutches are used in most engineering sectors such as machine tools, marine engineering, earth moving equipments and construction machinery depending on the requirements. The clutches are available for wet and dry running.
By transmitting power from an engine to a gearbox and subsequently to the wheels, mechanical single and double action clutches offer a wide range of industrial applications. These Narsipur & Sons Mechanical Single and Double Action Clutches can engage and disengage the drive, change the direction of rotation, start loading gradually, and accelerate a prime mover to its maximum speed, among other things.
The torque application range for mechanical clutches is 1 kg to 80 kg. They are used in building machinery, earth moving equipment, machine tools, maritime engineering, and many other engineering fields.
A clutch is a mechanical device that enables the simultaneous disengagement of a stationary output shaft and an input shaft in motion. Usually, the mechanism that does the work is connected to the output shaft of a clutch, and a motor is coupled to the input shaft.
By depressing the clutch when moving out of gear, releasing it, and then pressing it again right before shifting into the next gear, you can double clutch and shift into gear. This technique is known as "double clutching." A double clutch gearbox, on the other hand, is an automatic transmission that employs two clutches to enable a smooth transition between gears.
A gearbox that shifts gears automatically using two clutches. This gearbox is hybrid because it distributes gearing across two output shafts and uses both manual and automatic gearing techniques.
A Narsipur & Sons wet clutch lowers the coefficient of friction by using oil. Wet clutches have a lower capacity, wear down more slowly, and produce less heat from friction than dry clutches of the same size, which have a higher torque capacity.
One tactic used in motorcycle racing is the slipper clutch, which enables the rider to completely avoid engine braking.
Narsipur & Sons Mechanical Single and Double Action Clutches are the best option for motorcycles since it is more compact, smaller, and typically has more friction than a single-plate clutch, although being more challenging to construct.
